Asphalt Academy Webinars

Pavement Preservation Treatments Series

Introduction to Crack Treatments &
Best Practices
(1.5 PDHs)

Introduction to Slurry Seal & Microsurfacing &
Best Practices

(2 PDHs)

Introduction to Chip Seals &
Best Practices

(2 PDHs)


$50 (per session)

Who Should Attend
This webinar is designed for technicians, engineers, facility and asset managers, planners, or others who need to enhance their knowledge of chipseals. This includes contractors, consultants, engineers, federal agencies such as FAA, FHWA, and military as well as DOD contractors, state, city and county officials, Metropolitan Planning and similar officials and academia.

Introduction to Crack Treatments & Best Practices
Istructors: Bryan Darling, Crafco, Inc. and Pat Peterson, Fahrner Asphalt Sealers
Register online to view the webinar recording - $50
Introduction to Slurry Seal & Microsurfacing & Best Practices
Instructors: Barry Dunn, Viking Construction, Inc. and Pierre Peltier, Terry Asphalt Materials, Inc.
Register online to view the webinar recording - $50
Introduction to Chip Seals & Best Practices
Instructors: Mark Ishee, Ergon Asphalt & Emulsions, Inc. and Brian Horner, E.D. Etnyre & Co.
Register online to view the webinar recording - $50

Group Registration Info

Outlines

Introduction to Crack Sealing/Crack Filling
•  Materials/products
•  Benefits
•  Site selection and timing
•  Application procedures & equipment
•  Specifications
•  Before & after photos

Best Practices
•  Crack Prep
•  Tricks of the trade
•  Quality Control & Assurance
•  Do's & don'ts
•  Weather restrictions
•  Acceptable/unacceptable workmanship
•  Troubleshooting

Introduction to Slurry Seal & Microsurfacing & Best Practices
•  Materials/products
•  Differences between slurry and micro
•  Benefits
•  Application procedures & equipment
•  Specifications
•  Mix design procedure
•  Before & after photos
•  Eco-efficiency
•  Pavement Preservation versus Reactive Maintenance

Best Practices
•  Site selection (PP versus RM)
•  Tricks of the trade
•  Surface preparation
•  Quality Control & Assurance
•  Utilizing JMF from mix design
•  Accurate calibration
•  Do's & don'ts of processes
•  Weather considerations
•  Acceptable & unacceptable workmanship

Introduction to Chip Seals & Best Practices
•  Materials/products
•  Selection of binders & aggregates
•  Benefits
•  Site selection
•  Application procedures & equipment
•  Specifications
•  Mix design process
•  Before & after photos
•  Eco-efficiency

Best Practices
•  Tricks of the trade
•  Quality Control & Assurance
•  Do's & don'ts of processes
•  Weather considerations
•  Acceptable & unacceptable workmanship
•  Troubleshooting
•  Utilizing JMF from mix design
•  Calibration procedure


Who Should Attend
This webinar is designed for technicians, engineers, facility and asset managers, planners, or others who need to enhance their knowledge of crack treatments. This includes contractors, consultants, engineers, federal agencies such as FAA, FHWA, and military as well as DOD contractors, state, city and county officials, Metropolitan Planning and similar officials and academia.

Instructions for viewing a recorded webinar (PDF 706 kb)

(A PDH Certificate is available upon request after you view the recording by sending an email to ai_webinars@asphaltinstitute.org with the name of the session and full name you used to register)

Fees & Registration
The registration fee is $50 for each recorded session. To register and pay for the entire series please call Charlena Gray at 859-288-4961 or email at cgray@asphaltinstitute.org

NOTE: Registration is per individual. Only the registered person will receive emails about the webinar and will be recognized for a PDH certificate.
See below for group registration.

Group Registrations and Discounts
Group Registration and discounts are available upon request.


For more information contact
webmaster@asphaltinstitute.org