What is a minimum temperature for asphalt mixes?
What is the proper thickness of lift that should be used?
Why does the paver pass have a rich shiny strip down the middle with dull, torn-looking edge strips?
The paver screed has too much lead crown in it.
What causes the paver pass have rich shiny strips on each side and a dull, torn look in the middle?
The paver screed does not have enough lead crown in it. Note: Paver screeds should have slightly more crown in the leading edge than in the trailing edge – usually about 1/8 inch. This may very with equipment manufacturer and/or width of paver pass. Even if the trailing edge of the screed is to place […]